[Milo] Utility helicopter ferry v1 — cruise
Actual helicopter flight across the lake toward the Coal Valley site. Control-driven route, with the landing outcome recorded separately.
ForgeMedia image references: Wild Horse Island maps and Coal Valley studies, native Forge Island baselines, compact-track-loader operator views, John Deere source imagery, 49 actual native Vermeer WIP ground tests, four ferry captures, and four v13 helicopter asset-viewer QA images. The private model payload is not included, and flyability/native-game integration are checked separately.
Actual helicopter flight across the lake toward the Coal Valley site. Control-driven route, with the landing outcome recorded separately.
Utility helicopter arrival at the proposed Coal Valley landing field. Actual game capture; final success requires the trajectory and safe exit checks.
Visual QA failed: obscured first flight frame. Camera timing and fog settings being corrected.
Visual QA failed: fully obscured exit frame. Actual collision landing and exit confirmed by trajectory; camera is being corrected.
Revised native lake locator — actual game capture
Revised native lake locator — actual game capture
Revised native lake locator — actual game capture
Actual native orthographic top view of the 1,000 × 1,000 m transferred Coal Valley ground. Proposed map center 47.795000 N, 114.312000 W; source imagery is terrain texture, with 3D campus structures still to be built.
East edge of the transferred campus where the new road link will meet the Montana access corridor. Road joining remains in development.
Landing-field review at source offset 80 m east, 95 m south of campus center. Proposed pad center 47.79414565 N, 114.31092805 W. Native ground view before construction.
Approach from the island side toward the campus drive and proposed landing field. Perspective native capture; ground texture only.
Source-textured campus overview in the native game. The original fields, roads and ponds are visible; this is the current ground layer.
Source-asset viewer QA render of the v13 MH-6: official ForgeFX anvil baked into the existing painted fin surface. Flyability and native game integration are checked separately; the model payload remains private.
Source-asset viewer QA render of the v13 MH-6: port-side fin branding in context. Only the official ForgeFX anvil is baked into the painted surface; flyability and native game integration are checked separately.
Source-asset viewer QA render of the v13 MH-6: rear/port context check for the baked official ForgeFX anvil. Flyability and native game integration are checked separately; the model payload remains private.
Source-asset viewer macro QA render for v13 MH-6 anvil legibility on the baked painted fin surface. Flyability and native game integration are checked separately; the model payload remains private.
First ground test — being corrected
First ground test — being corrected
First ground test — being corrected
First ground test — being corrected
Revised visual study — shared playground and existing HDD Rodeo (blockout)
Revised visual study — PD25R carrier, mast and practice apron (blockout)
Revised visual study — vacuum excavator ground test (blockout)
Revised visual study — coach station ground test (blockout)
Walk-in view linking both drills to the proposal apron
Both authored D23x30 rigs on the existing course
Two 200-foot lanes with depth gates
Actual exit targets viewed back toward the rigs
Existing course results board; no fabricated scores
Blockout mast, hammer and pile alignment
Tracked-carrier blockout geometry
Belly-pack control station blockout
Piles and proposed practice spacing
Mast clearance from above
Carrier service-side silhouette
Pile-driver blockout with existing HDD course behind
Tank-mounted vacuum body blockout
Vacuum hose and potholing practice position
Locator blockout beside the proposed pothole
Pressure-wash hose routing study
Operator working-clearance study
Generic carrier front and cab silhouette
Vacuum blockout beside other proposal machines
Orb silhouette blockout, before finished Verbot asset
Proposed coach placement near pile-driver training
Coach station and existing drill course
Coach station beside vacuum practice
Walk-up proposal station and its blockout label
Existing HDD rod racks and rig service area
Shared setting for future machine and lesson updates
Practice apron linked visually to existing competition lanes
Side-by-side pile and vacuum machine blockouts
Separated machine stations and walking clearances
Proposal playground in the wider Forge Island landscape
Remote-control console concept blockout
Console concept sharing the existing drill playground
Replica-control layout study, without a live video-feed claim
Simulation-for-validation concept station
Control bench and nearby machine geometry
Control placement and equipment visibility study
Simulation-for-design controller review station
Controller geometry study for the design-review proposal
Design, validation and remote-control stations in one playground
Contact sheet for the 45 planned proposal shots; individual native captures are shown as separate cards.
First lake locator test — being corrected
First lake locator test — being corrected
First lake locator test — being corrected