One fresh P2-20260801 generation from four separate 4096×4096 inputs submitted in a single multiview request. The source sheet and isolated crops are preserved separately.
Result: This is a meaningful improvement over the earlier Prism 3.1 trial. The model preserves the box silhouette, raised handle, regular diagonal vent pattern and small lightning bolt. It is still an experimental draft: the wireframe shows aggressively triangulated, uneven topology and some surface/detail simplification.
MODELP2-20260801
TASK5b8564bf-5e16-45d6-b525-8fd579ad3c1f
MEASURED921 triangles · 1 mesh · 1 material
INPUT4 × 4096-square images
Appearance Review
Textured front-left oblique: strong overall silhouette, handle, vent pattern and bolt.Textured physical-left side: regular diagonal vent slots read clearly.Textured front: ports, display and warning stripe are recognizable.Opposite-side inspection: generated side surface and knob.Rear inspection: hidden-surface reconstruction remains inferred.
Topology Review
True Blender edge topology, oblique view: dense triangle fan patterns and long diagonals.True Blender edge topology, physical-left: vent geometry is modeled, but not clean quad-like manufactured topology.True Blender edge topology, front: ports and panel features have geometry, with uneven triangulation.
What It Nails / What It Misses
Nails
Recognizable hard-surface silhouette; raised carry handle in the right place; front control layout; regular diagonal left-side vents survive much better than the first trial; small black lightning bolt is present on the silver stripe; triangle budget is met natively.
Misses
Topology is aggressively triangulated rather than cleanly structured for an artist handoff. Long diagonal edges and concentrated triangle fans appear around the shell, handle mounts and front panel. Hidden sides are inferred. Fine lettering, exact seams and some surface transitions are approximate.
Interpretation: P2 is the first result in this trial that looks like a credible artist-cleanup starting point. It does not mean the asset is production-ready; the topology still needs cleanup, likely retopology around the vents and hard-surface panel edges, and a final decal/detail pass.
