Halliburton Fact Corpus

The Halliburton Cementing Services digital twin prototype gives programmers an interactive requirements model for learning the machinery.

Rachel Calgaro reported at the Team Leads meeting that the Halliburton Cementing Services site visit answered open scope questions and left the project team well aligned.

Halliburton and ForgeFX 2026 planning included discussion of Halliburton Cementing Services scope.

Halliburton and ForgeFX 2026 planning included discussion of Halliburton equipment simulation.

Halliburton and ForgeFX Cementing Services included discussion of Halliburton equipment simulation.

Halliburton and ForgeFX Cementing Services included discussion of Halliburton Cementing Services scope.

Halliburton and Cementing Services Scope Revisit included discussion of Halliburton Cementing Services scope.

Halliburton and Cementing Services Scope Revisit included discussion of Halliburton equipment simulation.

Halliburton and ForgeFX scope discussion included discussion of Halliburton Cementing Services scope.

Halliburton and ForgeFX scope discussion included discussion of Halliburton equipment simulation.

Halliburton and ForgeFX Off Shore Platform Discussion included discussion of Halliburton Cementing Services scope.

Halliburton and ForgeFX Off Shore Platform Discussion included discussion of Halliburton equipment simulation.

Keith scheduled a ForgeFX meeting about the Safe Grip Marketing video.

Halliburton discussed Safe Grip language updates, HWO model differences, and offshore applications with ForgeFX.

Halliburton's IT governance review cited an existing solution before considering ArborXR.

Halliburton offshore and workover updates had reusable tanks, pumps, choke manifold, lines, artwork, and functionality.

Halliburton workover mode reduces the BOP stack because it does not use strippers.

Halliburton workover configuration changes equipment presentation while keeping jack, slip, and pipe logic largely unchanged.

Halliburton conventional equipment uses a simplified slip system instead of SafeGrip.

Halliburton wanted conventional equipment training for sites that do not use the SafeGrip system.

Halliburton wanted its simulator environment changed from land to offshore while retaining much of the existing equipment.

Rodrigo Lopez had already texted Kevin Miller about a Halliburton meeting with ForgeFX.

Greg Meyers identified Halliburton marketing and sales as possible later simulator use cases.

Rodrigo Lopez framed the Halliburton simulator as both a training tool and an equipment testing environment.

Greg Meyers proposed tying ForgeFX's Halliburton simulator to the backend data of Halliburton's schematic digital twin.

Rodrigo Lopez described Halliburton's new equipment direction as moving toward remote-controlled units.

Halliburton's Serio equipment controller was being replaced by a UI/UX controller.

Rodrigo Lopez wanted ForgeFX to connect Halliburton simulator work with Kevin Miller's equipment strategy work.

Halliburton's existing digital twin was schematic and lacked the visuals Rodrigo Lopez wanted.

Rodrigo Lopez said Halliburton's new equipment work included automation development.

Halliburton's HWO localization discussion included French, Portuguese, and Arabic.

ForgeFX was discussing reuse of Halliburton's on-land hydraulic workover unit assets for offshore units.

The Halliburton immersive platform foundation already included user interactions, branding, UI design, and UI experience.

Halliburton's cementing services work was positioned to reuse the existing Halliburton immersive platform foundation.

Halliburton's discharge manifold equipment simulator let users identify incorrect job-site conditions and replace them with correct ones.

Halliburton's discharge manifold equipment simulator turned walk-the-line checklists into VR inspection training.

Halliburton's HWO simulator trained basic pipe movement and operator-station management interactions.

Halliburton's HWO simulator focused on snubbing operations using the SafeGrip system.

ForgeFX told Halliburton it develops digital twins and digital replicas for training, operations, and monitoring.

ForgeFX described itself to Halliburton as a simulation development company with more than 20 years in business.

The Halliburton familiarization lesson target kept individual procedures near 15 steps to avoid overwhelming users.

The Halliburton ADC RCM mixing controller automatically manipulated valves when measured density differed from the requested density.

Halliburton cementing services bucket testing verified volumes and valve behavior.

Halliburton cementing services familiarization covered checklist preparation and equipment readiness for mixing and pumping.

The Halliburton cementing services first phase focused on artwork, digital assets, one familiarization lesson, and two guided lessons.

Halliburton already used Intune for mobile device management.

Halliburton's Meta headset deployment no longer required paid Meta Horizon management software after purchase.

Halliburton cementing services did not need an interface change because serial communication remained in use.

Halliburton cementing services kept a three-phase project structure in the scope revisit.

Halliburton IT support requested another meeting with ForgeFX about the proposed solution.

Devin Callahan studied plug milling as a possible starting point for Halliburton's scope.

Keith sent ForgeFX priority topics and Halliburton reference images for scope review.

Keith Henning flagged well-testing connection representation for Halliburton plug milling scope review.

Devin Callahan recognized the DME downstream pipework symbols in the Halliburton plug milling P and ID.

Keith Henning said the provided P and ID was a valid starting point for a Halliburton plug milling lesson.

Keith Henning said Halliburton plug milling had downstream differences around the choke.

Keith Henning said the Halliburton pumping-side setup mostly stayed the same for plug milling.

Keith Henning described the P and ID as the process identification diagram for the Halliburton plug milling scope.

Keith Henning said the land plug milling setup was roughly the same as the existing setup, with more tanks.

Keith Henning scoped most of the existing Halliburton environment for reuse in plug milling.

Keith Henning scoped the Halliburton plug milling lesson as land-based.

Keith Henning confirmed the Halliburton design-of-service document was land-based.

Devin Callahan said Halliburton phase three scope discussions had landed on plug milling as the starting point.

The Halliburton cementing services opportunity was active again at the weekly proposal review.

Halliburton provided ForgeFX a 3D model of a platform similar enough for the offshore simulation scope.

Keith Henning scoped reuse of the land-job stair tower on top of the Halliburton offshore beams.

Keith Henning said a PSV platform supply vessel model was sufficient for the Halliburton support ship.

Keith Henning scoped the Halliburton support ship as stationary background scenery.

The immediate Halliburton offshore scope used the unit, a pipe rack, and limited deck equipment.

The Halliburton offshore simulation operator console is on the platform, not the support ship.

Halliburton offshore umbilicals run from the support vessel up to the platform.

Halliburton offshore pumping equipment and tanks sit on the support vessel as a floating deck.

Halliburton wellhead platforms are normally supported by a compact semi-sub vessel connected by a bridge.

Keith Henning identified 3D models as useful source material for the Halliburton offshore structure.

Keith Henning said ForgeFX needed to remove Shell logos from the Halliburton wellhead platform reference.

Keith Henning said the wellhead platform image was a sufficient starting point for the Halliburton offshore scope.

The Halliburton accumulator panel familiarization scope requires a significant panel update.

ForgeFX has a low-quality Halliburton accumulator model and control panel.

The Halliburton accumulator accessory panel is located in the work basket.

The Halliburton accumulator is located on the ground.

Halliburton well-control drills require an accumulator accessory panel.

Mary Pierce treated the Halliburton BHA visualization as a separate budget line item.

The Halliburton BHA visualization is for familiarization rather than scenario decision-making.

Halliburton plug milling requires bottom-hole-assembly visualization work.

Halliburton HWO phase three includes bottom-hole-assembly visualizations.

Halliburton HWO offshore work requires ocean and platform environment art.

Halliburton HWO offshore work reuses many HWO and DME models.

Halliburton provided an offshore rig model for the HWO phase-three scope.

The Halliburton offshore environment is viewed from the top of the work basket.

Halliburton scenario one takes place in the existing onshore environment.

The Halliburton long-form scenario combines four new lessons.

Halliburton HWO phase three includes a long-form onshore scenario.

The Halliburton pricing table was based on an AI bot draft.

Halliburton needs a pricing table for the discussed scope.

Kristen Cox said Meta HMS support was only committed through 2030.

Kristen Cox said Halliburton approved ArborXR but needed documentation for the extra MDM layer.

Devin Callahan said Halliburton's Arbor delays came from IT approval rather than client frustration.

Kristen Cox said ForgeFX added Halliburton score reporting in Arbor insights.

Kristen Cox said the Halliburton app sent session scores to users by email.

Kristen Cox said Halliburton needed device-group provisioning for its VR training apps.

Kristen Cox said Halliburton had multiple globally distributed user groups with unique training apps.

Devin Callahan said Halliburton wanted ArborXR features such as screen monitoring.

Kristen Cox said all but two or three Halliburton devices were enrolled in Meta HMS.

Kristen Cox said MACE had been Halliburton's provisioning partner.

Kristen Cox said Halliburton had ten globally distributed devices that were not enrolled when HMS rolled out.

Kristen Cox said Meta HMS rollout contributed to stalling Halliburton's program launch.

Devin Callahan said Halliburton had Meta Quest and Quest 3S headsets.

Devin Callahan said Halliburton used ArborXR for connection, build delivery, and location tracking.

Devin Callahan said Halliburton had pursued ArborXR as its MDM.

Devin Callahan said Halliburton's headset scope was around 20 to 30 units at the time.

Kristen Cox said Halliburton IT preferred Intune for supporting the expanding XR program.

Kristen Cox said Halliburton used Intune to manage PCs and tablets.

Kristen Cox said Halliburton's ArborXR trial had been extended multiple times and then shut down.

Kristen Cox said Halliburton had 28 VR units during the VR Expert Intune touchpoint.

Abimbola Raji said Halliburton headsets were idle during the ArborXR approval delay.

Kristen Cox recommended testing the Halliburton VR application through Intune before choosing an MDM.

Kristen Cox recommended enrolling one Abby-held Halliburton device in Intune for testing.

Kristen Cox said Intune fell short when XR trainers were not co-located with device users.

Kristen Cox said Intune worked better when XR device end users operated independently.

Kristen Cox said ForgeFX was not affiliated with ArborXR.

Abimbola Raji said Halliburton needed to track employee headset usage hours.

Abimbola Raji said Halliburton needed to push updates to VR assets regardless of location.

Abimbola Raji said Halliburton needed asset-location data for the VR headsets.

Kristen Cox said globally distributed XR programs usually need remote provisioning.

Kristen Cox said ForgeFX did not require ArborXR for Halliburton VR deployment.

Kristen Cox named Knoxlabs and VR Expert as provisioning partners with Intune experience.

Kristen Cox said ForgeFX had not integrated Halliburton VR devices into Intune.

Kristen Cox said Intune had limited XR device-management features compared with operational XR tools.

Kristen Cox said ArborXR can segregate third-party access during XR device management.

Kristen Cox said ForgeFX does not typically provide direct provisioning support beyond testing devices.

Kristen Cox described Halliburton build provisioning as possible through either MDM platform.

Devin Callahan identified screencasting as an advanced VR-specific device-management feature.

Devin Callahan split Halliburton MDM requirements into IT management and advanced VR management.

Keith Grutzmacher framed the Halliburton MDM meeting around Microsoft Intune for VR device management.

River Cox said the Halliburton pricing bottleneck was a programmer at 1400 hours and an artist at 1100 hours.

River Cox said Halliburton pricing with scenario included reached 8,848 hours.

Mary Pierce asked for Dave to run Halliburton pricing numbers with actuals and markup.

Mary Pierce said HWO totaled 815 thousand dollars before DME work.

River Cox said HWO currently had seven lessons during the Halliburton comparison.

Devin Callahan described Halliburton's long-form experience as a recap lesson instead of a sandbox scenario.

Mary Pierce said the Halliburton scope included four onshore lessons and three offshore lessons.

Mary Pierce said Halliburton language requirements were not included in the reviewed pricing option.

River Cox said 8,342 Halliburton hours at a 200-dollar rate was almost 1.7 million dollars.

River Cox said Halliburton option one totaled 8,342 hours without the scenario framework.

River Cox said written Halliburton commitments needed to match scaled-down scope.

Rachel Calgaro said the Halliburton offshore environment was only viewed from the work basket.

Rachel Calgaro said the Halliburton offshore environment did not include a boat.

Rachel Calgaro said the Halliburton offshore environment used a stagnant water texture.

Rachel Calgaro said Halliburton offshore scope needed a bare-minimum art review.

Devin Callahan said ForgeFX had CAD files for the Toolpusher panel.

Devin Callahan said the Toolpusher panel controls the accumulator remotely.

Rachel Calgaro said the Halliburton equipment 3D model covered bottom-hole assembly visualization.

Mary Pierce said ForgeFX considered converting phase-two lessons into an offshore environment.

Mary Pierce said Halliburton had high interest in offshore work.

Mary Pierce said bottom-hole assembly visualization supported the Halliburton onshore lessons.

Mary Pierce named hole cleaning and TIW valve Kelly holes as Halliburton onshore lessons.

Mary Pierce named plug milling and well-control drills as Halliburton onshore lessons.

Mary Pierce said Halliburton's first option added four onshore plug-milling lessons.

Mary Pierce said River Cox grouped Halliburton line items into pricing options.

Mary Pierce said she converted Halliburton scope from River Cox's Word document into a spreadsheet.

Devin Callahan said the Halliburton support ship was a separate modeling task.

Devin Callahan wanted Brandon Floyd to have more authority over Halliburton model optimization.

Devin Callahan wanted Halliburton art assets optimized for VR performance.

Brandon Floyd said the work-basket-only scope reduced Halliburton VR polygon concerns.

Devin Callahan said the Halliburton phase kept users inside the upper work basket.

Devin Callahan said the Halliburton offshore rig scene would be viewed from a work basket.

Mary Pierce said Rodrigo previously acted like he had what he needed for Halliburton Cementing Services.

Mary Pierce said she emailed Rodrigo about next steps for Halliburton Cementing Services.

Mary Pierce said Halliburton HWO went out during the proposal-team review.

Mary Pierce said the Halliburton Cementing Services proposal was still processing through Rodrigo.

Greg Meyers said the Halliburton plug milling proposal was comprehensive and included many options.

Mary Pierce said Devin Callahan was joining the Halliburton plug milling proposal review.

Mary Pierce said ForgeFX had a scheduled Halliburton call to review the plug milling proposal.

Mary Pierce said the Halliburton plug milling proposal involved Abby and Keith.

Halliburton wanted HWO budget room for multi-user remote network engagement.

Halliburton said smaller proposal chunks were easier than million-dollar approvals.

Halliburton compared HWO package complexity with the prior DME walk-the-line simulator work.

Devin Callahan said plug milling needed to plug into HWO systems while other systems were active.

Mary Pierce said HWO estimates reflected actuals from previous Halliburton projects.

Devin Callahan said HWO structural system work would support long-form content later.

Devin Callahan said Halliburton onshore core lessons were programmer-focused rather than art-focused.

Mary Pierce said HWO package one included TIW valve and kelly hose operations.

Mary Pierce said HWO package one included plug milling, well-control drills, hole cleaning, and circulation procedures.

Halliburton aligned the first HWO development package around land onshore plug milling.

Mary Pierce divided the Halliburton HWO proposal into smaller development packages.

Mary Pierce said the Halliburton HWO proposal included language lessons.

Mary Pierce said the Halliburton HWO proposal included expanded onshore lessons and offshore artwork.

Halliburton introduced Kenneth as a subject matter expert for future simulator development.

Mary Pierce needed HWO contractor hours as a basis of estimate for Halliburton cost justification.

Greg Meyers said new Halliburton estimates were based on previous project actuals.

Greg Meyers said Halliburton actuals exceeded ForgeFX's original estimate for prior work.

Mary Pierce said Halliburton needed additional justification for the HWO proposal cost.

River Cox said Halliburton uses separate lessons for jack-operator and assistant-operator tasks.

Dave Vaillancourt estimated the Halliburton trip at about $12,000.

Mary Pierce said Halliburton budget work included a travel line item that later got erased by changed numbers.

Rachel Cordone was working on glassware in connection with the Halliburton Cementing Services hours budget.

ForgeFX created functional virtual versions of Halliburton hydraulic workover units.

Halliburton training simulators let operators, trainers, and trainees meet inside a virtual environment.

ForgeFX digitized Halliburton oilfield operation layouts from existing CAD diagrams.

The Halliburton simulator scope included operator training, walk-around inspection, and technical walk-around work.

ArborXR tags are typically used as filters.

Ungrouped DME6 was receiving an Arbor Insights build instead of the group build.

ArborXR View Details shows target version and install or update pending state.

Halliburton headset statuses distinguish install pending from update pending.

Switching an ArborXR group to a channel makes its devices download that build on their next connection.

Assigning an ArborXR channel to a device group is a one-time setup.

The Halliburton simulator settings include an end-user toggle to show the system version.

Halliburton release build numbers serve as release-date shorthand.

Halliburton build 2130 included the December score bug fix.

Halliburton build 2130 was the recent release build available across all groups.

ArborXR channels assign builds to groups of devices.

ForgeFX manages Halliburton build placement into ArborXR release channels.

ArborXR beta channels support review-team testing before stable release.

ArborXR stable release channels deliver finished updates to normal users.

Mary Pierce recommended using John Deere and Halliburton examples to show past performance in the GM proposal.

Rodrigo Lopez said a service supervisor who operates the equipment daily would help on site.

Rodrigo Lopez said field language would require ForgeFX to ask clarifying questions.

Rodrigo Lopez reserved two Halliburton site-visit days for the ForgeFX team.

Rachel Calgaro described a night review after the first Halliburton site day.

Mary Pierce wanted another Halliburton site-visit day for photos and reference capture.

Mary Pierce wanted one Halliburton site-visit day for show-and-tell.

The Halliburton Victoria environment included Elite 2 and automatic density control.

The Halliburton pilot focused on an older equipment version with about 500 units.

Rodrigo Lopez said the ER test uses water to simulate cement or spacer.

The Halliburton Victoria visit plan covered calibrations, water tests, and pressure tests.

The Halliburton Victoria visit plan included equipment setup instruction from an operator.

The Halliburton Victoria visit plan included a walkaround of the unit.

The Halliburton Victoria visit plan started with a safety meeting.

Brandy Hargrove was assigned to receive the ForgeFX team in Victoria.

Rodrigo Lopez said Halliburton would provide hard hats and safety glasses.

Rodrigo Lopez said the Victoria site visit required steel boots and long-sleeve shirts.

Rachel Calgaro said Devin Callahan would primarily manage the Halliburton project.

Rachel Calgaro was supporting project management for the Halliburton project.

Rodrigo Lopez met with ForgeFX about the Halliburton cementing-services agreement.

The Halliburton proof of concept was intended to guide later VR production planning.

The Halliburton Cementing Services proof of concept targeted proposal functionality and scope.

Greg Meyers planned to email Abby about receiving the Halliburton contract.

The Halliburton sales process had a roughly fifteen-month history before contract receipt.

Greg Meyers identified the new contract discussed in Proposal Team review as Halliburton.

Mary Pierce said ForgeFX received the Halliburton contract on Friday.

Rachel Calgaro said the Cementing Services project was signed.

The Cementing Services site visit included Devin Callahan and Dave Vaillancourt.

The Halliburton Cementing Services project introduced Rodrigo as a new project manager contact.

The Halliburton Cementing Services contract opened ForgeFX work with a second Halliburton PSL.

ForgeFX announced that it was awarded a Halliburton Cementing Services contract.

Carl Lowther had reviewed documents that ForgeFX sent for the Cementing Services project.

Halliburton is a ForgeFX client.

Mary directed removal of StrataTech and JPEO from prior template.

Mary 2026-05-14 09:40 HST directed JD and Halliburton listed first.

Devin Weidinger said they were frustrated with ForgeFX code quality on recent projects including Somero and Halliburton deliverables.

Abby has client-controlled timeline.

All environment props are wish-list only.

River Cox said they were frustrated with ForgeFX code quality on recent projects including Somero and Halliburton deliverables.

Halliburton POC 1 primary deliverable is jack operator console (HWO unit).

River Cox committed at the Team Leads meeting to start Karla as the Halliburton Cementing Services technical lead and main developer before the June 1 site visit.

Mary Pierce committed at the ForgeFX GM proposal internal review to focus team resources on the IHE Canadian trade school proposal and deprioritize General Motors and Halliburton.

Cementing Services project starts August 1 2025 for a 6 month run, confirmed at the Tech Art QA Leads meeting.

Rachel Calgaro flagged that she and Devin Callahan are both on vacation the last week of July 2025, constraining the Halliburton on-site visit.

Greg Meyers reported Rodrigo targets a July 10 2025 start date for the Halliburton cementing services VR project, contract still pending.

Brandon Floyd ran Halliburton Phase 1 by keeping Satish, Justo, and Travell full-time on it during the one-month window, with Ed split to Sawmill.

Halliburton Phase 2 planned 4 programmers but only 3 are on; hiring a new programmer with shader, material, lighting and performance skills.

Halliburton Phase 2 runs an aggressive 12-week schedule with RC in 10 weeks: 5 new lessons plus a new interactive console.

Greg Meyers and Mary Pierce were doing program management for Halliburton and John Deere clients in April 2025, taking time away from sales and marketing work.

ForgeFX smaller active projects in April 2025 included Vermeer, Ocuweld, Forgedim, and Forge Effect Showcase alongside Halliburton and John Deere.

ForgeFX reorganized from vertical departments to project-based teams in April 2025, forming two primary clusters: Halliburton team led by River Cox and John Deere team led by Devin Weidinger.

Halliburton license agreement for 28 HWO simulator devices was finalized as of the 2026-03-31 Team Leads meeting.

Rachel Calgaro tracked monthly deliverables and change order opportunities for the ARA project and coordinated with Devin Callahan on Halliburton ArborXR support.

Halliburton has thousands of field rigs globally, creating a massive addressable population for ConveyBot-derived AI SME upsells from ForgeFX.

Halliburton's AI SME track extends ConveyBot's past-performance training from physical rigs to digital-management modules across global field sites.

Halliburton ConveyBot is ForgeFX's first in-sim NPC subject-matter expert, predating SomoBot.

Four AI-SME opps at Proposal Due 2026-05-17 across 4 verticals — IS4S, TaskUs, Halliburton, Vermeer — institutional momentum, not coincidence.

ForgeFX's past-performance covers both physical-then-virtual (Halliburton) and virtual-then-physical (GM BCDC greenfield).

Halliburton HWO Package 5 Multi-Language Training is priced $130,000 for Arabic with right-to-left support, French, and Portuguese localization.

Halliburton HWO Lesson and Environment Expansion totals $1,582,416 across five development packages at the $185 per hour ForgeFX standard hourly rate.

ForgeFX positions Halliburton Convey Bot as the pre-LLM AI-shaped-coach analog, framing AI-coaching capability as predating the LLM era for Vermeer credibility.

Miguel Whitney is refining Convey Bot to sound more professional and SME-like for ForgeFX's in-sim NPC interactions.

Halliburton operates two physical training simulators for its cementing services, one in Aberdeen UK and one in Lafayette LA.

Halliburton runs 2 physical training sims for cementing services: primary Aberdeen UK, secondary Lafayette LA. Past-perf anchor for GM BCDC VOT.

Genevieve Moore 2026-05-15 04:30 HST @Mary verbatim reply on appendix B Halliburton+JD summary pages: 'Yeah, I will stick them in'; 4-min response, T-12h to ship.

Mary Pierce 2026-05-15 04:26 HST @Genevieve in #general_motors_proposals: 'in appendix B do we have summary pages for halliburton and John Deere we can add?' Past-perf gap query at T-12h to ship.

Mary Pierce 2026-05-14 09:40-09:41 HST reordered the GM proposal customer-logos slide: JD and Halliburton move to the top; StrataTech and JPEO drop off.